|
ZIRCAR Alumina-Silica Insulating
Blanket Type RS-C Moldable is composed of long, high strength
ceramic fibers, with an inorganic alumina binder/rigidizing agent.
It is a wet blanket that is shipped rolled up and sealed in a
plastic bag to preserve its moldability.
Type RS-C Moldable forms a strong,
rigid, low density insulation for applications to 1260°C (2300°F).
It is 100% inorganic, non-combustible and contains no toxic or
hazardous materials. Type RS-C Moldable is ideal for insulation of
complex shapes and exhibits excellent erosion resistance under
conditions of high, hot gas velocity. It can be cut to any size with
a knife, scissors, or steel rule die. It can be formed to virtually
any shape desired. Type RS-C Moldable possesses excellent strength
for ease of installation. An unique process of locking in the binder
ensures that it will not migrate. The result is a uniform
homogeneous structure throughout the entire material.
Type RS-C Moldable does not adhere to
itself, yet it can be cemented using air-set mortar. Type RS-C
Moldable will normally air dry in 24 to 48 hours, with all the
properties of a pre-fired insulation. Curing can be accomplished
with a hot air gun or torch, or by immediate temperature exposure in
the application.
Type RS-C Moldable can be put
directly into high temperature ovens or furnaces. |
SUGGESTED
APPLICATIONS
Type RS- C Moldable is used as hot
gas duct, stack and flue liners.
Type RS- C Moldable is used as
custom molded valve enclosures.
Type RS- C Moldable is used as
small appliance insulation.Type RS- C Moldable is used as
hot-face insulation where gas velocity is of concern.
Type RS- C Moldable is used for
combustion chamber liners.
Type RS- C Moldable is used as
back-up insulation for molten metal transport troughs.
Type RS- C Moldable is used for
custom fabricated insulation parts.
Type RS- C Moldable is used as
exhaust manifold insulation.Type RS- C Moldable is used as
back-up insulation.
Type RS- C Moldable is used as high
temperature pipe insulation (internal and external).
Type RS- C Moldable is used as
asbestos lagging replacement.
|
