Alumina-Silica Paper Type ASPA-1 & ASPA-2 are lightweight refractory materials formed into a highly flexible sheet. These papers offer very low thermal conductivity and are designed for applications where purity, crack resistance, high strength and resistance to heat flow are of importance. Type ASPA-1 & ASPA-2 are ideal for high temperature gasketing up to 1260°C (2300°F). Type ASPA-1 contains an organic binder for superior strength and Type ASPA-2 is treated to remove all organics.

Alumina-Silica Fiber Paper Type ASPA-880 is a high temperature, lightweight refractory material made from alumina-silica fibers formed into highly flexible sheets. It is made from shorter and smaller diameter fibers with a higher alumina content and are laid up at significantly higher density. These factors lead to high temperature, slow shrinkage, higher strength, and better chemical resistivity. This alumina-silica fiber paper exhibit very low thermal conductivity and is designed for use in applications where flexibility, high strength and resistance to heat are paramount. Type ASPA-880 exhibits low thermal conductivity and is ideal for applications up to 1450°C (2642°F). It is used in environments where standard ceramic fiber papers will not survive.

Alumina-Silica Fiber Paper Type ASPA-970 is an industrial grade, lightweight refractory material made from alumina-silica fibers formed into highly flexible sheets. This alumina-silica fiber paper exhibits very low thermal conductivity and is designed for use in applications where flexibility, high strength and resistance to heat are of paramount. Type ASPA-970 is ideal for applications up to 1260°C (2300°F).

Alumina Felt Type RS-3000 is 97% high purity alumina fiber, ceramic felt with less than 1% shot. Type RS-3000 is a strong, flexible material with fibers held together with an organic binder. It is available in roll, sheet or custom die-cut parts. Type RS-3000 is ideal for application temperatures as high as 1650°C (3002°F).

Silica-Magnesia Papers Type RSPA-SOL are thermal insulation products capable of withstanding continuous operating temperatures up to 1260°C (2300°F). Type RSPA-SOL papers are designed to have enhanced in-vitro solubility characteristics which enable them to meet European regulatory requirements for synthetic vitreous fibers (European regulatory requirements directive 97/69/EC).

Refractory Sheet Cloth and Tape are ceramic fiber reinforced alumina composites. They offer strength, durability, flexibility and versatility required by many high temperature applications up to 1300°C(2373°F). Its high Alumina content makes Refractory Sheet Cloth and Tape highly resistant to many environments including molten aluminum as well as many types of fuel oils. When hardened with AL-Hard. Refractory Sheet Cloth and Tape become "rock hard" for greater strength.

Silica Blanket Type SB-2000 is a high temperature insulation blanket made of mechanically interlocked continuous filament amorphous silica fibers with useful properties to temperatures of 1100°C (2012°F).

Silica-Magnesia Blanket Type RSBL-SOL is made from soluble NON RCF fiber formed into a mechanically needled flexible blanket capable of withstanding continuous operating temperatures up to 1260°C (2300°F). It is designed to have enhanced in-vitro solubility characteristics. The fibers are soluble in body fluids and offer users an alternative to refractory ceramic fiber blankets. Type RSBL-SOL Blankets meet European regulatory requirements (Directive 97/69/EC).

Type SIL Silica Cloths consists of high temperature  non textured amorphous silica fiber yarn, woven into an extremely strong fabrics. These non preshrunk textiles are ideal for applications with continuous use up to 1250°C (2300°F) or occasional excursions up to 1600°C(3000°F).