|
REFRACTORY SHEET TYPE RS-MS MOLDABLE
SLEEVING
GENERAL INFORMATION
 |
ZIRCAR Refractory Sheet Type RS-MS Moldable Sleeving is
a moist woven alumina composite sleeving. It is supplied in a wet form ready for
the fabrication of custom shapes. It can be cut to size with a knife or
scissors, wrapped around a suitable form, air dried, and immediately put into
service. It is ideal for applications up to up to 1300캜(2373캟) ZIRCAR Refractory Sheet Type RS-MS Moldable Sleeving
is odorless and contains no asbestos. Its high alumina content makes RS-MS
highly resistant to many environments including molten aluminum as well as many
types of fuel oils. When hardened with AL-Hard Refractory Sheet RS-MS become
"rock hard" for greater strength. The many uses for Type RS-MS Sleeving include:
cover for rings and saddles used in the annealing of hand blown glassware;
asbestos sleeving replacement metal tube and pipe insulation; hose line and
cable protection; and high temperature gaskets. |
SUGGESTED APPLICATIONS
- COVER FOR RINGS & SADDLES USED IN THE
ANNEALING OF HAND BLOWN GLASSWARE
- ASBESTOS SLEEVING SUBSTITUTE
- INSULATING METAL TUBING
- PROTECTION OF HOSE LINES AND CABLES
- GASKETING
- PIPE INSULATION
CHARACTERISTICS &
PROPERTIES
|
Color |
White |
|
Moisture Content , % |
40 |
|
Composition, % (after 1000°C (1832°F)
calcination) |
|
|
Al2O3
|
72 |
|
SiO2 |
16 |
|
CaO |
6 |
|
B2O3 |
3 |
|
Other Oxides (each) |
<1 |
|
Organic |
<1 |
|
Density (dry) pcf |
90 |
|
Maximum Use Temperature* , C (F) |
1300(2373) |
|
Melting Point , C (F) |
1500 (2732) |
|
Flammability |
Nil |
|
Wall Thickness, in. |
1/16 |
* Maximum use temperature is
dependent on variables such as stresses, both thermal and mechanical, and
the chemical environment that the material experiences.
AVAILABILITY
|
ITEM |
DESCRIPTION |
|
|
RS SLEEVE 1/2" ID X 25'
LG |
|
|
RS SLEEVE 1/2" ID X 100'
LG |
|
|
RS SLEEVE 1" ID X 25'
LG |
|
|
RS SLEEVE 1" ID X 100'
LG |
|
