주식회사  산울( SANUL CO., LTD )  서울 금천구 두산로 70  현대지식산업센타 B동 1003호  우) 08584 
 Tel : 02)2611-5574, 02)2611-5573, 02)2104-6616   Fax : 02)2611-5575   02)2104-6618  e-mail:<sanul1996@gmail.com>  약도 

소재와재료

세라믹 섬유

접착 코팅제

산업용세라믹

산업용벨트

기계부품

견적요청

홈페이지
 

 

 Boron Nitride Lubricoat® and Boron Nitride Lubricoat-Blue®

 KEY ATTRIBUTES

• Totally Non-Wetted by Molten Aluminum, Magnesium,    and Their Drosses
• Acts Like Teflon® to Molten Metal
• Protects Ceramics, Metals and Graphite
• Maintenance is Reduced and Operator Satisfaction    Maximized
• Applied Like House paint
• Safe, Water-Based, No VOC's

 Active Ingredient ..........................................BN
Max Use Temperature....Air 1800 F / 1000 C
..........................................Vac 2550 F / 1400 C
.........................................Inert 3300 F / 1800 C
Use Atmosphere.......................................... All
Fired Composition.........................85-90% BN
.......................................................10-15% Al2O3
Liquid Carrier.......................................... Water
Binder Phase...........................................AI2O3
Percent Carrier .............................................75
Percent Active Ingredient ............................25
Brookfield Viscosity (cps).......900-1200 3/60
Specific Gravity (g/cm3)........................... 1.12
Color ......White, except when specified blue
Shelf Life (months) ...................................>12
Coverage (ft2/gal) ......................................400
Coating pH................................................... 2-4
H F R Ratings ..........................................1-0-0
Substrate Use............................................... All

 • Launders & Runners
• Auto-Pour Ladles
• Troughs & Tubes
• Funnels & Spouts
• Filter Bowls, Boxes
• Caster Tips
• Dross Press Heads 		1. High Wear/Erosion Areas
     refer to Boron Nitride Hardcoat

2. Permanent Mold/Low      Pressure Die Casting
     refer to Releasecoat
1. Resuspend if needed.
2. Clean surfaces to be painted     of oils dirt, scale etc.
3. Apply one thin layer by brush     or spray like ordinary house     paint.
4. Allow to dry at room     temperature before use.
Coating comes as a standard white paint; blue paint is available for better visibility; white paste is also available for uses where a thick version is needed. These coatings are also available in a 5-gallon pail upon request. Standard package is a wide-mouth 1-gallon pail. Please specify when ordering.
CAUTION: DO NOT CONTACT WET COATINGS WITH MOLTEN METAL.

 These recommendations are believed to be accurate. No guarantee of their accuracy is made and the products are sold without warranty, expressed or implied. Purchasers shall make their own tests to determine suitability of their use.