|
주식회사 산울( SANUL CO., LTD ) 서울 금천구 두산로 70 현대지식산업센타 B동 1003호 우) 08584
Tel : 02)2611-5574, 02)2611-5573, 02)2104-6616 Fax : 02)2611-5575 02)2104-6618 e-mail:<sanul1996@gmail.com> 약도
|
|
 |
High performance profile ATL
10 |
BRECO TIMING BELTS
(open length)
|
Available versions:
Standard
Endless
joined BRECO TIMING BELTS (V) see chapter Transport
technology.
|
|
|
Note:
In-between belt
widths are available. Preferred delivery in rolls of 50 or 100 m.
Please specify shorter dimensions (cut to length) separately. Please
specify lengths above 50 m
separately.
|
1. Tooth shear strength
specific tooth
force
|
| Rotational speed n (rpm) |
Ftspez (N/cm) |
Rotational speed n (rpm) |
Ftspez (N/cm) |
| 0 |
73,5 |
2000 |
40,3 |
| 20 |
72,4 |
2200 |
39,0 |
| 40 |
71,4 |
2400 |
37,8 |
| 60 |
70,5 |
2600 |
36,6 |
| 80 |
69,6 |
2800 |
35,5 |
| 100 |
68,7 |
3000 |
34,5 |
| 200 |
65,0 |
3200 |
33,6 |
| 300 |
62,1 |
3400 |
32,7 |
| 400 |
59,5 |
3600 |
31,9 |
| 500 |
57,4 |
3800 |
31,1 |
| 600 |
55,5 |
4000 |
30,3 |
| 700 |
53,7 |
4500 |
28,5 |
| 800 |
52,2 |
5000 |
26,9 |
| 900 |
50,8 |
5500 |
25,5 |
| 1000 |
49,5 |
6000 |
24,2 |
| 1100 |
48,3 |
6500 |
23,0 |
| 1200 |
47,2 |
7000 |
21,8 |
| 1300 |
46,2 |
7500 |
20,8 |
| 1400 |
45,2 |
8000 |
19,77 |
| 1500 |
44,3 |
8500 |
18,84 |
| 1600 |
43,4 |
9000 |
17,95 |
| 1700 |
42,6 |
9500 |
17,12 |
| 1800 |
41,8 |
10000 |
16,32 |
| 1900 |
41,0 |
|
| |
|
The specific tooth force
Ftspez is the maximum force N a belt tooth with a width of 1 cm can
transmit. This value depends on the rotational speed of the drive pulley. The
calculation takes into account each identical carrying values for each meshing
tooth. With more than 12 meshing teeth ze is limited to
12.
Ft =
Ftspez * ze * b
Ft = Tangential force
Ftspez = Specific tooth force in
N/cm
b = Belt width in
cm
ze = Number of meshing
teeth
zemax =
12
|
2. Tension cord strength (M)
Ftzul [N] (open length)
permitted
tensile force of the belt cross-section
|
| Belt width b [mm] |
32 |
50 |
75 |
100 |
| BRECO ATL 10 |
7200 |
11200 |
16800 |
22400 | |
Specific elasticity
Cspez [N]:
Example: 10[6] =
106
|
| Belt width b [mm] |
32 |
50 |
75 |
100 |
| BRECO ATL 10 |
1,8*10[6] |
2,8*10[6] |
4,2*10[6] |
5,6*10[6] | |
| Belt width b [mm] |
32 |
50 |
75 |
100 |
| BRECO ATL 10 |
0,220 |
0,340 |
0,510 |
0,680 | |
| Belt width b [mm] |
32 |
50 |
75 |
100 |
| BRECO ATL 10 |
40 |
60 |
85 |
110 | |
3.
Flexibility
Minimum number of teeth,
minimum diameter
|
 |
 |
( X ) without
contraflexure
|
( X X ) with
contraflexure
|
| Belt type |
Number of teeth zmin ( X ) |
Tension roller dmin [mm] ( X ) |
Number of teeth zmin ( X X ) |
Tension roller dmin [mm] ( X X ) |
| BRECO ATL 10 |
25 |
80 |
25 |
150 | |
|
