|
 |
Imperial profile H
BRECOFLEX® TIMING BELTS
Available lengths
Standard, single-sided
- For preferred lengths please refer to table "Open lengths"
- Under 1066.8 mm: further lengths upon request
- From 1066.8 mm to 16002.0 mm any number of teeth, minimum quantity applicable for in-between lengths
- Above 16002.0 mm upon request
Available versions:
- Standard, single-sided
- Nylon tooth facing (PAZ)
- Transport backing (T) and (T-PAZ), minimum quantity applicable
- Thicker back of the belt (DR) and (DR-PAZ), belt thickness increased by 2.18 mm, available from 1066.8 mm, minimum quantity applicable
H profile
drawing
single-sided
3D view
Available lengths:
Standard, double-sided (DL)
- available from 1066.8 mm
- Minimum quantity applicable from 1250 H length
- Nylon facing on double-sided belts, coating only on the inside (DL-PAZ), minimum quantity applicable from 1250 H length
Available versions:
- Standard, double-sided (DL)
- Nylon tooth facing (PAZ)
- Transport backing (T) and (T-PAZ), minimum quantity applicable
- Thicker back of the belt (DR) and (DR-PAZ), belt thickness increased by 2.18 mm, available from 1066.8 mm, minimum quantity applicable
H profile drawing
double-sided
Open lengths [mm]
| Length code: |
Length [mm]: |
Length code: |
Length [mm]: | |||||
|
|
|
|
| Imperial code | Preferred belt widths b [mm]: |
Tension cord strength Fadm [N]: | |||
|
|
|
Technical Data:
| Power transmission: | < 30 kW |
| Rotational speed: | approx. 10.000 rpm |
| Peripheral speed: | approx. 60 m/s |
| Synchronous pulleys: |
from z=12 (w/o contraflexure) from z=20 (with contraflexure, DR, T, DL version) More information
on |